Hip / Pelvis
Endoprosthetics
Femoral Heads / Acetabular Cups
EcoFit® 2M SP Cup
This tripolar or dual mobility design not only reduces the risk of dislocation but it also increases the range of motion.
The EcoFit® 2M SP cups have inner surfaces that are highly-polished and they are available in a cementless (44 to 62mm) version.
This tripolar or dual mobility design not only reduces the risk of dislocation but it also increases the range of motion.
This tripolar or dual mobility design not only reduces the risk of dislocation but it also increases the range of motion.
The system allows for a dual articulation – the innermost being between a standard femoral head and the inside of an EcoFit® 2M head, and the outermost being between the outer surface of an EcoFit® 2M head and the inside of an EcoFit® 2M SP cup.
The EcoFit® 2M heads are made of implacross® E (crosslinked polyethylene stabilised with vitamin E). The inner articulating surface is designed for combination (i.e. articulation) with implantcast’s standard femoral heads using the press which is provided on the instrument set. There are 10 head sizes in the range. The outer articulating surface of the head is intended for articulation with the inside of an EcoFit® 2M SP implavit® cobalt chromium molybdenum alloy (CoCrMo) cementless cup.
The EcoFit® 2M SP cups have inner surfaces that are highly-polished and they are available in a cementless (44 to 62mm) version. The cementless cups are coated with implaFix® (commercially pure titanium / cpTi and hydroxyapatite / HA) to allow for pressfit fixation and bony ingrowth. For additional rotational stability the EcoFit® 2M SP cup has four spikes on the outer surface.